Do You Need To Clear A Check Engine Light On Yamaha Vstar After Repair

Q: Afterwards installation of a new throttle trunk does everything reset to normal function on the automobile?

When taking out an old throttle body and putting a new one in does the computer reset itself to normal idling and functions as information technology was before the the system went down?

My automobile has 80000 miles.
My car has an automatic manual.

Hullo there. After replacing the throttle body to your engine, if the engine calorie-free was on and has a pending lawmaking, the code volition go away. If the code was a difficult permanent code, then the ECM (computer) would need a hard reset. Remove the negative battery cable (-) and go on it off for about thirteen minutes, then claw up the bombardment cable and brand sure information technology is tight. The engine light will go out and articulate all codes as it goes into a learn cycle. If the trouble was addressed then the cheque engine light will remain off, but if something is still not working, and then later 10 starts or driving iii days will make the cheque engine light come back on, unless it is causing multiple sensors to activate codes. If you need further assist with resetting the ECM, and then seek out a professional person, such as i from Your Mechanic, to help you.

The statements expressed above are only for advisory purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your automobile

Our certified mechanics come to y'all ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Experienced Mechanic?

Earn up to $lxx/hr

What others are asking

What does the Shift to Park message mean?

The Shift to Park message can appear on the commuter data center (DIC). The DIC displays this warning when you lot need to shift the transmission into P (Park). This message will occur if you lot try to remove the primal from...

Engine squealing when idling

Hi at that place. A squealing noise is a common sign that the rotating parts such as your belts are slipping on their pulleys. A worn chugalug will make this noise due to the loss of tension and gripping ability of the...

Air conditioning works well briefly, then blows warm

Howdy there. A few different things can cause the AC to shut off after a short while. The outset being an overfilled Air conditioning refrigerant. When this occurs, the force per unit area in the system rises too high and causes the Ac to...

My rotors proceed going bad.

You're correct. You lot shouldn't exist going through so many brakes within a year. There is definitely an issue here. I believe you may just want to do a brake system affluent (https://www.yourmechanic.com/services/brake-system-affluent). This will eliminate the beginning thing I thought...

Battery and alternator issues.

This may be a sign of a weak battery, a failing voltage regulator or failing alternator. Equally y'all may know, the alternator is responsible for charging the battery while the engine runs by generating amperage and recharging the bombardment while...

Where is the oil pump located?

The oil pump is behind the harmonic balancer/crankshaft pulley and is bolted (approximately eight-10 bolts) to the front of the engine block. Prior to suspecting an oil pump fault, use an external force per unit area guess to measure out actual oil pressure level at...

03 Nissan Altima wouldn't accelerate over 50 mph.

Hullo in that location. This sounds like the gas pedal position sensor or the throttle body position sensor is not working properly. You tin try manually resetting the gas pedal position sensor. To do this, perform the following: Turn on the ignition...

Related manufactures

Browse other content